How to Flash Android on Your Device Using USB Burning Tool 'USBBurningTool'

If you're looking for a simple and effective way to flash Android onto your device, then look no further than USBBurningTool. This versatile tool is specifically designed for Amlogic-based devices such as the MXQ PRO 4K TV Box.

In this article, we'll walk through the step-by-Step instructions on how to use USB Burning Tool (USBBurningTool) to flash Android onto your device.

Prerequisites

Before you begin, make sure that you have met all of the following requirements:

1. Download and install USBBurningTool from a trusted source.

2. Install the necessary drivers for your device's manufacturer, such as Amlogic USB Driver or Mediatek USB Drivers depending on your device model.

3. Ensure that your device is connected to your computer via an USB cable.

Step-by-Step Instructions

1. Launch USBBurningTool and connect your device to your computer using a microUSB cable.

2. Once the tool recognizes your device, click 'Start' or press Enter key on your keyboard.

3. A warning message will appear asking for permission to flash Android onto your device's internal storage. Click 'Yes' to proceed with the flashing process.

4. The flashing process may take several minutes depending on your device specifications and internet connection speed. Be patient and do not interrupt this step under any circumstances as it can cause permanent damage to your device.

5. Once the flashing process is complete, power off your device by pressing and holding down both the Power button and Volume Up/Down keys simultaneously for 10 seconds or until you see a white screen with an exclamation mark icon in its center.

6. Release all buttons when prompted; wait another few moments before unpluging USB cable from computer port while still keeping power cord plugged into wall outlet since some models require additional time after flashing finishes successfully without turning back on automatically afterwards!

Troubleshooting Tips

If you encounter any issues during the flashing process, such as a black screen or device not booting up properly:

1. Ensure that all drivers are installed correctly and your USB cable is securely connected to both devices.

2. Try factory resetting your device by pressing and holding down Power + Volume Up/Down keys for 10 seconds while still plugging in the microUSB cable.

In conclusion, USBBurningTool provides a simple yet effective way to flash Android onto Amlogic-based devices such as the MXQ PRO 4K TV Box. By following these step-by-Step instructions and ensuring that all prerequisites are met, you should be able to successfully install Android on your device in no time.

Remember always to exercise caution when flashing firmware or software onto any electronic device, as incorrect procedures can result in permanent damage. If you're unsure about any part of the process, it's always best to consult with a professional for assistance.

GetDroidTips will not be responsible for any internal/external damages that may occur during or after following this guide.

Usb burning tool